Skip to content
A black SUV with dark privacy tint on the rear windows and lighter front windows

Car tintUtah Window Tint Law

What Utah allows on a car, in plain words — and the law itself, word for word.

(801) 635-5681
In plain words

How dark can you tint in Utah?

For cars on Utah roads. Any shade behind the driver — the front side windows have a limit.

A white Kia K5 from the side, its windows tinted as Utah allows: lighter film on the front side windows (1), dark rear side windows (2) and back window (3), and a strip along the top of the windshield (4)
The numbers match the rows: lighter at the front, any shade behind the driver, a strip along the top of the windshield.
1Front side windowsAt least 35% of light throughAn officer’s meter may allow up to 5% either way.
2Rear side windowsAny shadeThe car needs mirrors on both sides.
3Rear windowAny shadeThe car needs mirrors on both sides.
4WindshieldA strip along the topDown to 4 inches or the AS-1 line, whichever is lower. The rest must let 70% of light through.
Mirrored or metallic filmNot allowedOn any window.

Utah Code §41-6a-1635 (effective May 7, 2025), as read on 3 October 2026: “(1) Except as provided in Subsections (2), (3), and (4) a person may not operate a motor vehicle with: (a) a windshield that allows less than 70% light transmittance; (b) a front side window that allows less than 35% light transmittance, with no more than a 5% variance observed by a peace officer metering the light transmittance; (c) any windshield or window that is composed of, covered by, or treated with any material or component that presents a metallic or mirrored appearance … (3) Nontransparent materials may be used: (a) along the top edge of the windshield if the materials do not extend downward more than four inches from the top edge of the windshield or beyond the AS-1 line whichever is lowest; (b) in the lower left-hand corner of the windshield provided they do not extend more than three inches to the right of the left edge or more than four inches above the bottom edge of the windshield; or (c) on the rear windows including rear side windows located behind the vehicle operator … (5) Except for material used on the windshield in compliance with Subsections (3)(a) and (b), a motor vehicle with tinting or nontransparent material on any window shall be equipped with rear-view mirrors mounted on the left side and on the right side of the motor vehicle …”

Laws change. This is a guide, not legal advice — check with the Utah Department of Public Safety if you’re unsure.

Tint shades

See window tint on your own car

Find your car among over 30,000 in Kepler’s tint generator and try every Kepler shade on it before we touch your glass. Then book the shade you like.

A red Porsche 911 with its rear side window outlined and an enlarged 20% shade preview

Choose your vehicle

See your car in a new shade.

Choose your make, model and year to start exploring window tint on your vehicle.

Illustrative vehicle preview

Screen illustrations are a guide, not measured VLT. Existing glass affects the result; legal requirements depend on your vehicle, window and location.

Questions

Window tinting questions

On a car, the front side windows have to let at least 35% of light through. Behind the driver — the rear side windows and the back glass — you can go as dark as you like, as long as the car has mirrors on both sides. The windshield can have a strip along the top, down to the AS-1 line or 4 inches, whichever is lower. Nothing mirrored or metallic.

Yes — most of our jobs are mobile. We bring everything with us and tint the car on your drive or at your work. Or you’re welcome at our place in Herriman.

Most cars take a few hours. We’ll tell you how long yours will take when we quote it.

Fast quote

Get a fast window tinting quote

Tell us what you drive (or what you live in). We’ll come back with a price fast.

(801) 635-5681

Your fast quote

Call